Posters


This program is tentative. Session times, ordering, and titles are still being finalized and may change without notice. Please check back for the confirmed program before making travel arrangements.

Day 2 · Monday, December 7 · 4:35–5:35 PM

Poster Session A

Posters are presented in the Foyer, alongside the extended coffee break.

  1. MEW: An Extensible Multi-user Engaged Workspace for Collaborative 3D Fabrication

    Kazutaka Nakashima, Daiki Yoshimoto

    YOSHIMOTO ART FACTORY LLC

  2. Screenprinting 2.5D Textile Textures

    Sheryl Teng, Clement Zheng

    National University of Singapore

  3. E-modular: Creating 3D Blocks with Integrated Electronics using Foldable Module Structures

    Kyunghee Yoo, Junichi Yamaoka

    Keio University

  4. SDF-Based Separation Constraints for Feature-Mapping Topology Optimization

    Eva Kato1, Ningna Wang2, Silvia Sellán2, Shane Scott1

    1Braid Technologies; 2Columbia University

  5. Fabricating Electrical Circuits on Glazed Ceramic Surfaces Using Overglaze Gilt Decoration

    Ryoichi Sakata1, AnBang Guo2, Hikaru Yanagi3, Shunpei Yoshimatsu4, Asuka Hoshikawa5, Kunihiro Kato3

    1Kinmirai Gakki - FANCY FUTURE Instruments Ltd.; 2Tokyo University of Technology; 3Japan Women's University; 4Denka-kougei; 5Independent Artist

  6. Flutegraphy: Product-specific Fabrication Approach for Repurposing Damage Behavior in Corrugated Cardboard

    Shunsuke Yasumura, Ryoto Honda, Tomoko Hashida

    Waseda University

  7. Curvature-Guided Computational Fabrication of Self-Forming Textile Surfaces

    Yimeng Cai, Qiuyu Lu

    The Hong Kong Polytechnic University

  8. A Generative Framework for Parametric Tactile Graphics with FDM Printing

    Vina Setiawaty1, Qian Ye2, Jake Jun Kang Tan3, Clement Zheng1

    1National University of Singapore; 2ShanghaiTech University; 3Harvard University

  9. iTPMS: Interactive Inverse Design of Spatially Varying TPMS Metamaterial Fields

    Junshang Ren1, Yuhu Guo2, Yuming Huang2, Weiming Wang2, Guoxin Fang3, Jiaji Li4

    1Nanyang Technological University; 2The University of Manchester; 3The Chinese University of Hong Kong; 4MIT CSAIL

  10. 4D-Fabricated Multi-Stable Cellular Metamaterial

    Haruto Kamijo, Tomohiro Tachi

    The University of Tokyo

  11. Stitching Through Time: Designing Shape-Changing Textiles with Dissolvable Embroidery

    Ganit Goldstein, Amit Schechter, Bailey Fernandez, Terry Knight

    Massachusetts Institute of Technology

  12. Proportion-Domain Watermarks for 3D Printed Objects

    Myo Thant Aung, Parinya Punpongsanon

    Saitama University

  13. Curvature by Constraint: Slots for Active-Bent Timber

    Alicia Nahmad Vazquez1, Jean-Nicolas Dackiw2, Shajay Bhooshan3

    1University of Calgary SAPL; 2The Circular Factory; 3ZHA

  14. AdaptAI: An AI-Assisted Design-to-Fabrication Interface for DIY Assistive Technology

    Mixuan Li1, Leila Aflatoony2

    1North Carolina State University; 2Georgia Institute of Technology

  15. Hiding Data in Knitting, Sewing, and Braiding

    Haruki Yasui1, James McCann2

    1Waseda University; 2Carnegie Mellon University

  16. Toward Custom-Fit External Breast Prostheses: Integrating User Needs, 3D Scanning, and Parametric Design

    Mixuan Li, Yuanqing Tian

    North Carolina State University

  17. Computational Fractals: A Framework Linking Fabrication, Surface Structure, and Transport Behavior in Self-Organized Clay Morphologies

    Wusihala Wusihala, Jingze Liu, Ran Che, Xiangyi Sun, Enza Migliore

    Southern University of Science and Technology

Day 3 · Tuesday, December 8 · 3:10–4:10 PM

Poster Session B

Posters are presented in the Foyer, alongside the extended coffee break.

  1. Computational Dip Coating

    Mehmet Ata Yurtsever1, Piotr Didyk2

    1Universita della Svizzera Italiana; 2University of Lugano

  2. Difficulty Estimation and Crafting Support for Mizuhiki Knotting

    Minori Kosuge, Yuki Igarashi

    Ochanomizu University

  3. Cast Resin Joints for Irregular Branches with 3D-Printed Molds

    Hironori Yoshida

    Aalto University

  4. TriFlock: Selective Electrostatic Flocking via Multi-material 3D Printing

    Kexin Wang1, Marwa AlAlawi1, Yitong Sun2, Jiaming Liu3, Stefanie Mueller1

    1MIT CSAIL; 2Royal College of Art; 3Massachusetts Institute of Technology

  5. Culturally-Inspired Triangle Harvesting for Irregular Scrap Reuse

    Grace Luo1, Yuxuan Mei2

    1Avon High School; 2Wesleyan University

  6. Automatic Lens Placement for Personalized 3D Printed Eyewear

    Qian Liu1, Ziyang Chen1, Kenan Bektas2, Mustafa Doga Dogan3, Kaan Akşit1

    1University College London; 2University of St. Gallen; 3Adobe Research

  7. From Cultural Archive to Cut Paper: A Connectivity-Aware Pipeline for Folk Papercutting

    Zhuodi Cai

    University of Washington

  8. Computational Design of Reusable Protective Foam for Multiple Objects

    Daisuke Kitaura1, Tsukasa Fukusato2, Naoki Kita1

    1Shinshu University; 2Waseda University

  9. A Parametric Workflow for Customizable Insulin Pen Stabilizers from Hand Measurements

    Misa Yamamoto

    The American School in Japan

  10. Programming Extruded Surfaces with Kiri-Origami Scissor Linkages

    Hiroka Matsumoto, Tomohiro Tachi

    The University of Tokyo

  11. Fabrication-in-the-Loop Bayesian Optimization for End Users: An Incremental Ranking Feedback Approach

    Yuto Asano, Yuki Koyama

    The University of Tokyo

  12. Working in Total Darkness: Parametric Design and 3D Printing of Tools for the Safelight-Free Wet-Plate Darkroom

    Chinatsu Ozawa, Yoichi Ochiai

    University of Tsukuba

  13. SonoFold: Computational Design and Fabrication of Deployable Origami Products with Acoustic Tunability

    Naoki Kobayashi1, Koichi Yoshino2, Tatsuki Ishibashi3, Masayuki Yamada1, Ko Fujino1, Riko Naito1, Sachiko Ishida3, Kohei Yatabe4, Koya Narumi1

    1Keio University; 2Toppan Printing Co., Ltd.; 3Meiji University; 4Tokyo University of Agriculture and Technology (TUAT)

  14. Design and Fabrication of a Modular Multimodal Fingertip Haptic Interface for Softness and Roughness Rendering

    Keungyonh Bak, Kiun Kim, Hyung-Tak Lee, Sungwoo Chun

    Korea University

  15. Generative Whimsy Jigsaws

    Jeremy Chew1, Kenji Tojo1, Nobuyuki Umetani2, Bernd Bickel1

    1ETH Zurich; 2The University of Tokyo

All times are Japan Standard Time (UTC+9). Both poster sessions take place in the Foyer. The full schedule, including keynotes, papers, and demos, is on the program page.